testo 175 T3

Productdescription

The temperature must often be monitored and recorded in two places. With two interfaces for thermocouple probes (Type K and Type T), the testo 175 T3 is suited to this task. For example, in order to test the functionality of a heating system, the flow and return temperatures must be measured and documented. Refrigeration systems are tested in a similar way. In the autumn, the heating season begins, and with it the complaints from tenants that apartments cannot be heated to the desired extent. Using the testo 175 T3 and the versatile pipe clamp probes, you can take targeted measurements of the flow and return temperatures of individual radiators, in order to be able to identify and remedy causes (e.g. silting).

  • integrated USB and SD card interface for reading out data
  • Large memory for 2 million measurement values - large, easily legible display
  • Simultaneous monitoring and recording of two temperature measurement sites
  • Easy monitoring and documentation, e.g. of flow and return temperature of a heating system

Technical Data
Memory 1.000.000 readings
Storage temperature -20 to +55 °C
Operating temperature -20 to +55 °C
Dimensions 89 x 53 x 27 mm
Probe type Typ T (Cu-CuNi)
Meas. range -50 to +400 °C
Accuracy ±0.5 °C (-50 to +70 °C)±0.7 % of mv (+70,1 to +1000 °C)
Resolution 0.1 °C
Probe type Type K
Meas. Range -50 to +1000 °C
Accuracy ±0.5 °C (-50 to +70 °C)±0.7 % of mv (+70,1 to +1000 °C)
Resolution 0.1 °C
Brochures
0572_1753_en_01.pdf (35 views)
PDF Refference
0572_1753_en_02.pdf (33 views)
PDF Refference 2
MeasurementParameters_temperature_en.pdf (35 views)
testo 175 T3, 2-channel temperature data logger with external sensor connections (TC Type T and Type K) incl. wall holder, lock, batteries and calibration protocol
  • Large memory for 1 million measurement values - large, easily legible display
  • up to 3 years battery life (standard battery (AA) exchageable by the user)
  • Included in delivery: Data logger testo 175 T3 including wall holder, padlock, batteries, calibration protocol and instruction manual
  • Please note that a USB cable is required for programming and reading out the logger. This is not included in delivery and must be ordered separately if required (order no. 0449 0047).
Measuring range
-50 to +400°C (Type T) -50 to +1000°C (Type K)
Accuracy
± 0,5°C (-50..+70°C) ± 0.7% of m.v. (+70.1 to+1000°C)
Resolution
0.1 °C
Protection class
IP65
Measurement rate
10 sec to 24 h
Memory
1 mio. measurement values
Batterie-Standzeit
3 years at 15 min. measurement rate
Online not buyable Ordernumber: 0572 1753
Images (4)