testo 176 T3

Productdescription

It is sometimes important to test whether the prescribed temperature limit values in a process are being adhered to. The testo 176 T3 in its robust metal housing is the right data logger for parallel measurement and recording of temperature values at 4 different sites in industrial processes. The requirements of a many different applications can be fulfilled using a broad range of connectable thermocouple probes (Type K, Type T, Type J).

  • Wareproof according to IP65
  • integrated USB and SD card interface for reading out data
  • Large memory for 2 million measurement values - robust metal housing (without display)
  • Simultaneous temperature measurement at up to four measurement sites thanks to different connectable thermocouple probes for the most widely differing applications
  • Robust metal housing protects from mechanical influences such as impact

Technical Data
Memory 2.000.000 readings
Storage temperature -40 to +85 °C
Operating temperature -20 to +70 °C
Dimensions 103 x 63 x 33 mm
Probe type Typ T (Cu-CuNi)
Meas. range -200 to +400 °C
Accuracy ±1 % of mv (-200 to -100,1 °C)±0.3 °C (-100 to +70 °C)±0.5 % of mv (+70,1 to +1000 °C)
Resolution 0.1 °C
Probe type Type K
Meas. Range -195 to +1000 °C
Accuracy ±1 % of mv (-200 to -100,1 °C)±0.3 °C (-100 to +70 °C)±0.5 % of mv (+70,1 to +1000 °C)
Resolution 0.1 °C
Probe type Typ J (FeCuNi)
Meas. Range -100 to +750 °C
Accuracy ±1 % of mv (-200 to -100,1 °C)±0.3 °C (-100 to +70 °C)±0.5 % of mv (+70,1 to +1000 °C)
Resolution 0.1 °C
Brochures
0572_1763_en_01.pdf (34 views)
PDF Refference
0572_1763_en_02.pdf (32 views)
PDF Refference 2
MeasurementParameters_temperature_en.pdf (34 views)
testo 176 T3, 4-channel temperature data logger in metal housing with external sensor connection (TC Type T, Type K and Type J) incl. wall holder, lock, batteries and calibration protocol
  • Large memory for 2 million measurement values - robust metl housing (without display)
  • up to 8 years' battery life (standard battery (AA) exchageable by the user)
  • Included in delivery: Data logger testo 176 T3 including wall holder, padlock, batteries, calibration protocol and instruction manual
  • Please note that a USB cable is required for programming and reading out the logger. This is not included in delivery and must be ordered separately if required (order no. 0449 0047).
Measuring range
-200 to +400°C (Type T) -195 to +1000°C (Type K) -100 to +750°C (Type J)
Accuracy
± 1% of m.v. (-200 to -100.1°C) '± 0.3°C (-100 to +70°C) '± 0.5% of m.v. (+70.1 to +1000°C)
Resolution
0.1 °C
Protection class
IP65
Measurement rate
1 sec to 24 h
Memory
2 mio. measurement values
Battery life
8 years at 15 min. measurement rate
Online not buyable Ordernumber: 0572 1763
Images (3)